<acronym id="6caus"><center id="6caus"></center></acronym>
<tr id="6caus"><small id="6caus"></small></tr>
<acronym id="6caus"><small id="6caus"></small></acronym>
<rt id="6caus"><optgroup id="6caus"></optgroup></rt><rt id="6caus"><optgroup id="6caus"></optgroup></rt>
您現在的位置:首 頁    源拓產品 > 光纖收發器 > 10G光纖收發器  > 10G Base-T to 10G Base-R Media...
10G光纖收發器

10G Base-T to 10G Base-R Media Converter User’s Manual

型號: 10G光纖收發器


產品描述 技術參數 應用方案 相關下載 相關產品

1. Overview 

10G Base-T to 10G Base-R Media Converter supports two types media for network connection such as 10GBase-T and 10GBase-FX. The bridge media converter is designed with a 10Gbase Ethernet PHY chip that connects two types segments operation smoothly. This converter can be used as standalone unit or as slide-in module to the 19converter rack Chassis for use at a central wiring closet.

2. Technical Specifications

Standards

1000Base-T,  2.5GBase-T, 5Gbase-T, 10Gbase-T
1000Base-X, 2500Base-X,  5GBase-R , 10GBase-R

Media Supported

1000Base-T: Cat5 UTP/STP. MAX 100m;

2.5GBase-T: Cat5e UTP/STP. MAX 50m;

5GBase-T: Cat5e UTP/STP. MAX 50m;

10G Base-T: Cat6a UTP/STP. MAX 50m;

Port Type

RJ45,  SFP Slot 

Work Mode

1000Base-T  to  1000Base-X
2.5GBase-T  to  2500Base-X

5Gbase-T    to  5GBase-R 

10Gbase-T   to  10GBase-R

Power Supply

12V DC 

Power
consumption

MAX 5W

Operation Tempera tore

0 to 55

Relative Humidity

5% to 80% (non-condensation)

 

3. Installing the Converter

For as a standalone unit: 
 Verify the DC adapter conforms to your country DC power requirement and insert the power plug
 Connect the media cable for network connection
For as a slide-in unit:
 The slide-in Media Converter and Converter Rack Chassis should supplied only from the same source, both Media Converter Rack Chassis are built to match each other at dimension, DC jack, DC receptacle and power safety.
 Turn off the 19converter rack power
 Locate +12V DC power jack on converter back, carefully slide in and plug to 19rack +12V DC power receptacle
 Connect the media cable for network connection
 Turn on the converter rack power, the Power LED will light up

 

 

Wire connection, Front and Side panel

 

 

 

標簽:   10G光纖收發器

 4. Check List 

Before you start installing the Converter, verify that the package contains the following:
---The TP-Fiber Converter
---AC to 12V DC Power Adapter (for external models) or Power Cord (for internal models)
---The Users Manual
Please notify your local sales distributor immediately if any of the aforementioned items is missing or damaged. 

5. LED Description

LED

Status

Description

PWR

On

Power is on and normal.

FX Link/Act

On

Connection status display for Fiber Link.
ONindicates that Fiber link is in correct connection.

Blink

Active status display of fiber link.
Blinkindicates packet goes through FX end.

SD

On

Fiber signal is detected.

10G

On

Transfer rate of electric interface is 10Gbps.

Off

Rate of electric interface is 10Mbps.

TX Link

On

Connection status display for electric link.
ONindicates that electric link is in correct.

TX Act

Blink

Active Status display of fiber link
Blinkindicates packet goes through TX end.

 

有關詳細信息,請在“相關下載”中查看數據表

三分彩官网